Skip to content
AdasXADAS Calibration & Programming

Camera systems · Mobile service

Forward-facing camera calibration

Aiming of the windshield-mounted camera that supports lane, sign-recognition and collision-warning features, following the manufacturer procedure. Mobile service at your location in Mississauga, Oakville and Burlington.

Read the guide →

Forward-facing camera calibration at your location

The forward-facing camera sits behind the windshield near the rear-view mirror. It feeds lane departure warning, lane-keeping assist, traffic sign recognition, automatic high beams and, on many vehicles, forward collision warning and automatic emergency braking.

If the camera's aim is off by even a small amount, those systems can read the road incorrectly. AdasX calibrates forward cameras on-site for collision shops, auto glass businesses, dealerships and fleets across Mississauga, Oakville and Burlington, following the vehicle manufacturer's procedure.

When it's needed

When a vehicle may need forward-facing camera calibration

  • Windshield replacement on a camera-equipped vehicle
  • Camera removal, replacement or bracket repair
  • Front-end collision repair or structural work
  • Wheel alignment or suspension changes, where the procedure calls for it
  • A camera-related warning light or fault code

Availability depends on the vehicle's make, model, year and system, the equipment required, and the repair condition of the vehicle. We confirm compatibility and the required procedure before booking.

How we do it

How AdasX handles it on-site

  1. 01We confirm the make, model, year and equipment, and the procedure the manufacturer specifies.
  2. 02We pre-scan the vehicle and check conditions such as tire pressure, ride height and fuel level where required.
  3. 03We set up targets for a static calibration, perform an on-road dynamic calibration, or both, as specified.
  4. 04We post-scan to confirm the calibration completed and no related codes remain.

Booking

From first call to calibrated

  1. 1

    Send the vehicle details

    Contact AdasX with the vehicle details and the service required, including the make, model, year, VIN if available, and the repair performed.

  2. 2

    Confirm the job

    We confirm compatibility, the required procedure, pricing, location and appointment availability.

  3. 3

    On-site service

    We arrange on-site service at your approved business location, with the space and conditions the procedure needs.

  4. 4

    Calibrate & document

    We complete the applicable calibration procedure and provide the service documentation available for that vehicle.

Some vehicles or procedures need specific conditions, such as level ground, clear space around the vehicle, correct tire pressures, a completed wheel alignment, or additional repairs before calibration can be completed. We'll tell you what's needed when we confirm the job.

FAQ

Forward-facing camera calibration: common questions

Does every windshield replacement need a camera calibration?

Not every one. It depends on the vehicle and its equipment. Many vehicles with a windshield-mounted camera call for calibration after glass replacement, and the manufacturer's repair information decides it. Send us the vehicle details and we'll confirm.

Is forward camera calibration static or dynamic?

It varies by manufacturer. Some vehicles need a target-based static calibration, some are calibrated on the road, and some need both. We follow the procedure for the specific vehicle.

More answers on our FAQ page.

Book forward-facing camera calibration

Call or text AdasX with the vehicle details. We'll confirm compatibility, the required procedure, pricing and availability.

Request Service

Tell us what you need and we'll confirm compatibility, pricing and availability. Prefer to talk? Call or text 647-967-2647.