Skip to content
AdasXADAS Calibration & Programming

Guide

ADAS calibration documentation for repair files and insurers

Calibration documentation is the record that shows which systems were scanned and calibrated, which procedure was followed and what the result was. Repair shops typically keep it with the repair file, and insurers or customers may ask for it as part of a claim or a repair invoice. What's available depends on the vehicle and the scan tool used.

Key takeaways

  • Documentation shows which systems were scanned and calibrated, and the result.
  • Pre-scans and post-scans record the vehicle's condition before and after.
  • Insurers decide coverage. Records give the shop clear supporting detail.
  • Note incomplete procedures so a vehicle isn't released as if it were calibrated.

Why documentation matters

A calibration happens inside the vehicle's software, so the result isn't visible the way a new bumper or a new windshield is. Documentation is how a shop shows that the systems affected by a repair were addressed. It helps answer questions later, from the customer, the insurer or another technician, about what was done and when. It also helps the shop's own team confirm that every system identified at estimate was handled before delivery.

What calibration records commonly include

  • Vehicle details, such as make, model, year and VIN
  • The date of service and the repair that led to the calibration
  • A pre-calibration scan showing the codes present before the work
  • The systems calibrated and the type of procedure: static, dynamic or both
  • The result reported by the scan tool, such as completed or not completed
  • A post-calibration scan showing the codes remaining afterwards
  • Notes on prerequisites, such as tire pressures or alignment

Pre-scans and post-scans

A pre-scan reads the vehicle's modules before work starts, so existing faults are known and recorded. A post-scan reads them again afterwards, to confirm the calibration completed and no new faults appeared. Many vehicle manufacturers publish guidance on pre- and post-repair scanning for collision repairs. Keeping both scans in the file shows the condition before and after, which is often what someone asking about the repair wants to see.

How documentation supports claims

Whether and how calibration is paid for in a collision or glass claim is decided by the insurer and the policy. Documentation doesn't decide coverage, but it gives the shop clear supporting detail when calibration is part of the estimate or the final bill: what the repair information required, what was performed and what the result was. Shops that include calibration requirements at the estimate stage, and keep the records when the job is done, have the information ready if it's requested.

Linking the calibration to the repair information

The strongest records connect the calibration to the reason it was done. If the manufacturer's repair information calls for a calibration after windshield replacement, bumper removal or alignment, noting that requirement in the repair file ties the calibration to the repair. Some shops save the relevant page or reference from the repair information alongside the scan reports.

Good habits for repair files

  • Identify ADAS sensors and calibration requirements at estimate
  • Save the pre-scan before repairs begin
  • Keep the calibration report and the post-scan together
  • Note any procedure that couldn't be completed, and why
  • Store records where the whole team can find them by VIN or repair order

When a calibration can't be completed

Sometimes a procedure doesn't complete, for example because of a hardware fault, an incorrect part or conditions the procedure needs that aren't available. In that case, the record should say so, along with the code or reason, so the vehicle isn't released as if the calibration was done. The next step is usually a repair or a return visit once the issue is resolved.

Documentation with AdasX

We complete the applicable calibration procedure and provide the service documentation available for that vehicle. We work on-site with collision shops, glass companies, dealerships and fleets in Mississauga, Oakville and Burlington, so the records stay with your repair file instead of a separate facility's.

Documentation for customers

Customers increasingly ask whether their driver assistance systems were checked after a repair. A clear record helps the shop explain what was done in plain language: which systems the repair affected, that they were calibrated to the manufacturer's procedure, and that the post-scan showed no remaining faults. It also gives the customer something to keep with the vehicle's service history, which can help if the vehicle is sold later.

Glass jobs and fleet records

Documentation matters for glass companies and fleets too. A glass company can keep the calibration record with the installation details for each windshield, and a fleet can keep it with the vehicle's service records, so the next technician knows when the camera was last calibrated and why.

What to expect when you book

  1. Send the vehicle details: make, model, year, VIN if available, and the repair performed.
  2. We confirm compatibility, the required procedure, pricing, location and appointment availability.
  3. We arrange on-site service at your approved business location, with the space and conditions the procedure needs.
  4. We complete the applicable calibration procedure and provide the service documentation available for that vehicle.

Documentation

We complete the applicable calibration procedure and provide the service documentation available for that vehicle.

Frequently asked questions

What should a calibration report show?

Typically the vehicle details, the systems calibrated, the type of procedure, the result reported by the scan tool, and pre- and post-scan results. What's available depends on the vehicle and the scan tool.

Do insurers require calibration documentation?

Requirements vary by insurer and claim. Many shops keep calibration records with every repair file so they can provide them if asked. Check with the insurer handling the claim.

Is a pre-scan really necessary?

A pre-scan records the faults present before repairs start, which helps plan the work and shows what changed afterwards. Many manufacturers publish guidance on scanning before and after collision repairs.

Will you send the records to our shop?

We provide the service documentation available for the vehicle, so it can be kept with your repair file.

Need a calibration at your shop?

Call or text AdasX with the vehicle details. We'll confirm compatibility, the required procedure, pricing and availability.

Request Service

Tell us what you need and we'll confirm compatibility, pricing and availability. Prefer to talk? Call or text 647-967-2647.